LED STREET LIGHT – LED PARKING LOT LIGHTS
Change Is Good:
In LED Street Lighting Led
Lighting Sydney, change is good.
First LED lighting has far surpassed conventional lighting in electrical
savings and light output. Next
maintenance crew requirements are reduced to a minimum due to the long life of
LED Street lights. Led Lighting Sydney In fact, with lower operating temperatures
LED Street Lights are safer. Never the
less, LED Light pollution is minimized with motion sensing or Dali lighting
controls to shut off lights. Finally
LED Street Lights can dim to 10% saving even more energy.
Efficiency:
To begin with, LED Street Light design exceeds the latest
DLC efficiency standards. Above all, we
achieve DLC 4.3 Premium, highest it class.
Next Philips LED chips to have high lumen output, along with a 54,000-hour
life. More importantly, Led
Lighting Sydney is 140 Lumen per Watt. Resulting in increased light output, at a
minimal operating cost.
Input Voltage:
Nevertheless LED Street Light comes standard with the
universal input voltage. For example AC
100V – 288V or optional AC 277-528V. Led Lighting Sydney T0 demonstrate our 100-200 Watt can replace
HID of 200-1,000 watts. Best of all, a
10kV (Line-To-Ground) surge protection is standard.
Control:
Indeed lighting control architecture gives City Engineers
many options for maximum performance in efficiency and light output. In this case, illuminate the light when needed, and save
electricity in areas with low traffic. Above all, LED Street Light is
controllable by many options. 1-10V,
DALI Led
Lighting Sydney dimmable driver, Microwave sensor, Daylight sensor,
and ZIGBEE. Stop spending tax dollars
on obsolete technology and upgrade your city streets to the latest LED Street
Light technology.
Photometric Diagrams:
As seen in the video, Photometric Diagrams allow custom
lighting patterns for parking lots and streets.
Customize the Led Lighting Sydney
for the parking space or the intersection.
Many lens options are available as shown below,
Photometric Diagrams are available in:
2-S Type
3-S Type
3-M Type
Type 4
Or type 5
90×120
Maintenance:
As a matter of fact, street lights are easily maintained with
quick turn release. Obviously LED street
lights are designed for long life, Led Lighting Sydney but we all
know components can fail or be damaged. In any case, a quick release design
allows power supplies change in minutes.
Also, the LED Panel and the photometric lens can be changed as demands
require different options.
Mounting Hardware:
Without a doubt a wide variety of mounting hardware is
available. In fact, mounting hardware
will allow Led Lighting Sydney
LED street light mounting to existing equipment with minor modifications. In this
case, hardware will mount to existing round or square posts in minutes.
Many mounting styles are available including:
Trunnion Mounting.
Wall Arm Mounting.
Slip Fit Mounting.
Yoke Mounting
Comments
Post a Comment